Drayton’s stylish Digistat+C RF with tactile, audible & visual feedback. Featuring a familiar dial control with a digital display to show that the temperature has been set accurately every time. The cylinder thermostat controls the domestic hot water temperature to suit your lifestyle and gives energy savings when set between the recommended 60ºC - 65ºC.
- User adjustable Min/Max temperature setting
- Digital Display situated above dial is easy to read
- 5ºC setting steps
Technical
Digistat+C RF Transmitter/Sensor
Power supply |
2 x AA Size, 1.5V alkaline batteries |
Radio frequency |
433 MHz |
Signal range |
30m typically. The range may be affected by the composition / density and number of walls between the Digistat+C RF and SCR |
Temperature Range |
40 to 70ºC |
Control Accuracy
|
± 8ºC |
Ambient Temperature |
Operating 0ºC to 40ºC /Storage –20ºC to 55ºC |
Mounting |
Room Unit: Suitable for surface or conduit box mounting Sensor: Direct mounting onto cylinder |
Wiring |
Room Unit: No wiring required Sensor: Ø0.5mm2 2 core cable between sensor and Digistat+C RF transmitter |
Digistat SCR Receiver
Power supply |
230V a.c. 50 Hz |
Switch type |
SPDT (volt free) relay |
Switch rating |
2(1)A 230V or 24V a.c./d.c. |
Wiring |
Designed for fixed wiring only, to comply withcurrent IEE regulations
|