-
Home
-
Honeywell TM200VP-3/4E 15mm Mix Valve
Details
HONEYWELL TM200VP 3/4H 22MM THERM-MIX VALVE The Honeywell TM200VP Thermostatic Mixing Valve (TMV) is approved to the requirements of the NHS Model Engineering Specification D08 for thermostatic mixing valves, to reduce the risk of emitting water at an unsafe temperature.
Typical applications include bath or wash basin taps in systems where hot water is stored and supplied at high temperature. The TM200VP can be fitted to a single outlet or to several outlets, provided that both the water supply pressures and flow rates are adequate. To comply with health guidelines, a thermostatic mixing valve should be no further than two metres from any outlet it is supplying. The valve is WRAS and Buildcert approved.
The BuildCert TMV scheme recommends the following maximum hot water temperatures for use in all premises: 46oC for bath fill; 41oC for showers and washbasins; and 38oC for bidets. However, while 46oC is the maximum temperature for water from the bath hot tap, it takes into account the temperature loss in metal baths, especially in cold bathrooms. It is not a safe bathing temperature for adults or children. The British Burns Association recommends 37 to 37.5oC as a comfortable bathing temperature for children. In premises covered by the Care Standards Act 2000, the maximum water outlet temperature is 43oC.
Additional Information
|
