DetailsManifold Control Centre Underfloor heating requires water flow temperatures of approximately 35oC to 55oC dependent upon the design, heat loading and type of system used. The system should be balanced to achieve an approximate temperature differential of between 8oC and 10oC measured between the flow and return pipes.
The Myson Floortec Manifold Control Centre mixes return water from the underfloor heating with flow water from the primary pipework. The mixed temperature is controlled at a constant temperature and the proportions of flow and return water are varied accordingly. Mixing is undertaken in a three port mixing valve, incorporating a thermo-electrical valve controller. The MCC provides temperature controlled mixed water to an underfloor heating system with a heat pump up to 14kW.
The MCC is a lightweight compact unit which has been designed to connect directly onto a Myson Floortec manifold without the need for extra brackets or support.
Manifold The Myson Floortec underfloor heating manifold is the central point to most underfloor heating systems. The manifold is responsible for distributing mixed water provided by the MCC to each heating curcuit.
The Myson Floortec manifold is supplied pre-assembled with flow meters fitted as standard. Our manifolds are also supplied with all of the relevant fittings in onebox:-
Additional Information
|